The short answer
$350–$900
The inducer motor is the small fan that starts first and pulls exhaust out through the vent. It’s one of the pricier furnace parts. A failing one usually warns you first, with a squeal, grind or rattle when the furnace starts.
Typical industry ranges for Western Washington — not a quote. Your exact price comes upfront, before any work starts, and you approve it first.
What moves the price
Motor only or the whole assembly
Some furnaces take a motor on its own. Many use a complete inducer assembly with the housing and gasket, which costs more but fits exactly.
Single-speed or two-stage
Two-stage and variable-speed furnaces use two-speed or variable inducers, which cost more than a single-speed motor.
The brand
Common motors are widely stocked. Some brands’ inducers come only through the manufacturer’s own parts channel and may need to be ordered.
Why it failed
Water from a blocked condensate drain or a leaking vent can rust out an inducer. If that’s the cause, fixing the drain or vent is part of the job, so the new one lasts.
Furnace squealing or rattling when it starts?
That’s often the inducer bearings going. Book before it stops on a cold night. Exact price upfront.
Get My Upfront Quote60 seconds online · or call (253) 766-4822
Typical ranges at a glance
Typical industry ranges for Western Washington — not a quote. Your exact price comes upfront, before any work starts, and you approve it first.
Been told you need a new inducer motor?
An inducer that still spins can be fine, or it can be weak. The test is the suction it makes, read on a manometer, and the current it draws compared with its rating. If both are good, it isn’t the problem. Ask what they read.
We test it and show you the result before anything is replaced. If it tests fine, we say so.
Book a Second LookHow it works
- 1
Book online or call. Tell us what it’s doing, or what you were quoted. We diagnose it ourselves either way.
- 2
We test it and show you what we found. If the part tests fine, it isn’t the problem, and we tell you so.
- 3
You approve the exact price first. Nothing is replaced until you say go.
Where we work
From our base in Covington.
King County
Covington, Kent, Renton, Maple Valley, Black Diamond, Auburn, Enumclaw, Federal Way, Des Moines, Pacific, Algona
Pierce County
Sumner, Bonney Lake, Lake Tapps
Not on the list? Book it anyway and a technician confirms within 1 business hour.
Why homeowners call us
- You approve the price first. Exact price upfront, before any work starts.
- We answer 24/7. A technician reaches out within 1 business hour.
- 500+ jobs done by 4.9★ rated technicians. Licensed & insured.
- Fixed right, guaranteed. If it’s not right, we make it right.
Quick answers
What does a furnace inducer motor do?
It’s the first thing to start when the thermostat calls for heat. It pulls air through the burners and pushes exhaust out the vent, and the pressure switch confirms it’s working before the furnace lights.
What are the signs of a failing inducer motor?
A squeal, grind, rattle or loud hum when the furnace starts, the furnace starting and stopping without lighting, a pressure switch code on the control board, or a hot or burning smell near the furnace.
Can a noisy inducer motor be repaired?
Sometimes the noise is a loose mount or debris in the fan wheel, and that is a quick fix. Worn bearings mean a new motor: inducer motors on most modern furnaces are sealed and can’t be oiled or rebuilt.
Is it safe to run a furnace with a bad inducer?
No. The furnace won’t light without proof of draft, and one limping along on a weak inducer isn’t clearing exhaust the way it should. If it’s grinding, turn it off and book.
How long does it take to replace an inducer motor?
Usually an hour or two once the part is on hand. If your model’s inducer has to be ordered, we tell you the day it arrives.
Should I replace the furnace instead?
If the furnace is 20 years old or more, or needs other big repairs too, it’s worth comparing. We give you the repair price and, if you want it, the replacement price, and you decide.
How do I get my exact price?
Book online or call. A technician reaches out within 1 business hour, tests the part, and gives you the exact price before any work starts. You approve it first.
Ranges are for websites. Quotes are for you.
Book in 60 seconds — a tech reaches out within 1 business hour and your exact price comes before any work.
Get My Upfront Quote60 seconds online · or call (253) 766-4822
More from our site
Furnace making a loud noise? · Furnace won't turn on? · Pressure switch cost · Furnace repair cost · Repair or replace?