Mini-splits hide dust, mold, and bacteria in the blower wheel and coil. Without a deep clean, it blows into your home.
Deep Clean Report
Unit Health: Like New
All deep-clean tasks complete
Dust and mold build up faster than in ducted systems. Annual cleaning is essential.
No ducts to catch dust. It all collects inside the indoor unit.
8-point process. Nothing missed.
Filters washed, damaged ones replaced. Dirty filters choke airflow first.
Blower wheel is where mold hides. We disassemble and hand-wash it.
Pro-grade solution removes grime that blocks heat transfer and breeds bacteria.
Drain pan and line flushed clear. Clogs cause leaks, mold, and shutdowns.
Condenser rinsed and cleared. Dirty outdoor unit overworks the compressor.
Wiring inspected and tightened. Loose connections damage boards.
Pressures measured against spec. Low charge means a leak and a dying compressor.
Every surface checked for mold. If found, treated and sanitized.
"They pulled out the blower wheel and it was covered in black mold. I had no idea. After the deep clean, the air smells completely different — fresh and clean. Should have done this years ago."
"We have three Mitsubishi mini-splits. Next Phase cleaned all three in one visit. Thorough, on time, and they showed us before-and-after photos. The difference was shocking."
"Our Daikin unit was blowing warm air and had a musty smell. The tech found the coil was completely caked with dust. After the deep clean, it's cooling like the day we installed it."
"We've had annual maintenance for four years now. Our Fujitsu units are seven years old and still run perfectly. The technicians are always professional and explain what they're doing."
"The condensate drain was completely blocked and starting to leak. They caught it during the tune-up before it damaged the wall. That alone made the service worth it."
"They pulled out the blower wheel and it was covered in black mold. I had no idea. After the deep clean, the air smells completely different — fresh and clean. Should have done this years ago."
"We have three Mitsubishi mini-splits. Next Phase cleaned all three in one visit. Thorough, on time, and they showed us before-and-after photos. The difference was shocking."
No ducts means dust and moisture collect on the blower wheel and coil. Filters alone don't reach them. Without disassembly and wash, mold and bacteria blow into your home.
Very common in the Pacific Northwest. Moisture and dust create perfect mold conditions in the blower wheel and drain pan. Most owners don't notice until they smell it.
Once a year minimum. Twice a year if you run it year-round or anyone has allergies. Rinse filters monthly between visits.
Filters yes. Blower wheel and coil need disassembly, special solutions, and a bib kit. Doing it wrong damages fins or pushes mold deeper.
Yes. Mitsubishi, Daikin, Fujitsu all require proof of annual maintenance. No records = denied warranty claims.
Book your annual deep clean. Disassembled, washed, sanitized, tested.
All brands serviced · Licensed & insured · Warranty-compliant service records